uniform load
英 [ˈjuːnɪfɔːm ləʊd]
美 [ˈjuːnɪfɔːrm loʊd]
网络 均布荷载; 均布载荷; 均布负载; 均布载重; 均匀负荷
双语例句
- Study on Shape of Membrane Mirror Applied by Uniform Load
均匀载荷作用下膜基反射镜面形分析和研究 - A little bit more simple said masterbatch is a super constants of pigment and dye uniform load attached to resin of system of aggregates.
简单一点说色母是一种把超常量的颜料或染料均匀载附于树脂之中而制得的聚集体。 - The Uniform Load Type Water Wall Supporting Structures for Supercritical Once-through Boilers
超临界直流锅炉均匀荷载水冷壁支撑结构特性研究 - A newly developed three dimensional elastic viscoplastic ( 3 D EVP) model is introduced and implemented in a FE program for consolidation analysis of soft clay under uniform load.
介绍一个新发展的三维弹粘塑性本构模型和它在软土有限元固结分析中的应用。 - The mechanical behavior of the arch ribs, tied-beams and the longitudinal beams in the case of the half-bridge uniform load are worse than those of the full-bridge uniform load.
在受力上，拱肋、系梁和纵梁的半桥均布加载都比全桥均布加载时更不利； - Lane-the area of deck receiving one vehicle or one uniform load line.
车道&承受一辆车或一条统一载重线的桥面区域。 - Mathematic solution of symmetric parallel-haunched beams under uniform load
对称平直线加腋梁在均载作用下的解析解 - Therefore, it is not always possible to provide a uniform size of foundation for the entire structure, even if it may support a uniform load.
所以，即使基础能承受相同的荷载，要为整个结构设计出相同尺寸的基础并不总是可能的。 - On one hand, the eccentric movable mass blocks form uniform load on the excitation shaft, the rotating radius is shortened, and the stability of the mechanical vibrator is increased.
激振轴上偏心活动质量块在其上形成均布载荷，缩短了回转半径，增加了起振机的稳定性； - The bending of simply supported magnetoelectroelastic beam under uniform load treated as plane stress problem is investigated.
对磁电弹性材料构成的两端简支梁，在均布荷载作用下的弯曲问题按平面应力问题进行了研究。 - A concrete box girder model prestressed with externally CFRP tendons was cast, and the stress redistribution, deflection and crack development of the girder model were tested for 1001d under sustained uniform load.
制作了体外配置碳纤维筋预应力混凝土箱梁模型，对持续均布荷载作用箱梁的截面应力重分布、长期挠曲变形及裂缝发展等规律进行了1001d的试验观测。 - The analysis of the reinforcement concrete plates with openings bearing the uniform load strengthened by CFRP with the method of FEA was compared with the test result.
同时采用有限元方法对碳纤维增强钢筋混凝土开孔平板在均布荷载作用下的受力特性进行了分析，并与试验结果进行了比较。 - The stresses and deformations of shell and plate supporting a uniform load are calculated by ANSYS.
利用ANSYS软件计算了壳和板的应力和变形。 - Analysis of Shear Failure of Reinforced Concrete Beams Under Uniform Load
均布荷载下钢筋混凝土梁剪切破坏的研究 - It is based on analysing the uniform load mechanism of suspension bearing and raising reducer life.
为分析悬浮支承的均载机理和提高减速机寿命打下基础。 - By use of elastic-foundation theory, the paper analysis the slab in transition segment, and comes up with the calculating method of deformation and stress of the slab under the concentrated and uniform load, and analysis the settlement of subgrade behind the abutment.
运用弹性地基理论对路桥过渡段搭板进行分析计算，给出了集中荷载及均布荷载作用下搭板的位移和内力计算方法，对台后路基沉降进行了分析研究。 - Meanwhile, the research in each chapter is classified as vertical uniform load cases and later wind load cases.
在各章节中，又具体根据两种主要荷载形式（竖向屋面均布荷载和水平风荷载）分别研究。 - In order to validate the correctness of the geometrically nonlinear adapting rectangular plate element, the large deflection behavior of a clamped and simple supported square plate under uniform load is analyzed in this paper.
为了验证该协调单元的正确性，对在均布载荷作用下的四边简支和固定方形板进行了大挠度分析。 - This paper presents the method for computing barn pressure caused by uniform load and different materials.
介绍仓顶存在均载以及非单一填料所产生的贮仓压力计算方法。 - In this paper the beam functions of short beam with the uniform load or a concentrated load is given.
本文给出承受均布载荷和集中载荷作用的短梁的梁函数。 - The analytical solutions of the stresses and displacements were obtained for fixed-fixed anisotropic beams subjected to uniform load.
针对均布载荷作用下的各向异性梁在两端固支条件下的平面应力问题，给出了一个求解应力和位移解析解的方法。 - According to the mechanics characteristic of the parametric finite element model of hollow brick built in the paper under uniform load on top, the stress and strain results to be used in strength design and assessment was obtained.
通过建立参数化的空心砖有限元模型，在顶面均布载荷作用下的力学分析，得到了可以进行强度设计和评价的应力和应变等指标。 - For the high strength reinforced concrete arc shaft wall, its mechanical characteristics including the radial displacement, the concrete stress, the reinforcing steel bar stress, the load carrying capacity and the position of crushing zone are analyzed by experiment and finite element calculation under uniform load.
通过实验和有限元计算，对在均匀荷载作用下新型冻结井高强钢筋混凝土弧形板井壁的变形特性、混凝土和钢筋应力的分布规律、极限承载力及其压碎区的位置进行了分析。 - This paper deals with the limit conditions of axisymmetric shallow spherical shell with the Tresca yield criterion and the determination of the limit load of a simply supported spherical shallow shell according to method of statics and mobility subjected to uniform load.
导出了轴对称球扁壳基于Tresca屈服准则下的极限条件，并用静力法与机动法求解了周边简支且在均布荷载下的球扁壳的极限荷载。 - First were derived by functionally graded circular plate under uniform load, simply supported and fixed end of the theoretical solution, followed by a numerical analysis.
首先分别推导出了功能梯度圆板受均布荷载下，简支端和固定端的理论解，接着进行了数值分析。 - And shear lag effect under concentrated load is more obvious than it under uniform load.
其中集中荷载作用下的剪力滞效应明显大于均布荷载作用下的剪力滞效应。 - The computation formula of stabilization for arc arch with geometrical imperfection on radial uniform load and concentrated load are determined, where there are hinged, fixed and elastic support three boundary conditions, from virtual work and generalized variation.
本文首次利用虚功原理和广义变分原理推导了铰支、固支和弹性支撑三种边界条件与径向均布荷载和跨中集中荷载作用下含几何缺陷圆弧拱的计算公式。 - Base on the numerical calculation and test, the influence of end-plate connections with fill plate to the whole rigid frame is studied under uniform load, wind load and seismic load with a reality project.
在数值分析和试验的基础上，结合天津某工程实例分析了附加填板端板连接在均布荷载、风荷载和地震荷载作用下对刚架整体力学性能的影响。 - Deflection curve of substructure subjected to top single load, uniform load, del load are obtained.
求得子结构在顶部集中力、水平均布荷载、水平倒三角形荷载下侧移曲线解析式。 - The analytic model of the whole rolls when roller necks loaded with the uniform load has been established in this paper. A calculating model has been provided to achieve the high-precision of strip profile and thickness control.
本文建立了轴颈受均布载荷的四辊轧机全辊系变形解析模型，为实现高精度的板厚板形控制提供了一种计算模型。